Ryobi ELL0001 Manual del operador Pagina 1

1OPERATOR’S MANUALAIRgrip™ LASER LEVEL ELL0001SAVE THIS MANUAL FOR FUTURE REFERENCEYour laser level has been engineered and manufactured to Ryobi’s hi

1011NOTE: The multi-function base is not used when mounting by vacuum grip.n Place the laser level on the surface you want it secured to an

1011OPERATIONROUGH SURFACE ADAPTORSee Figure 6.Using the rough-surface adaptor, you can use the laser level’s AIRgrip™ feature to positon the unit on

1213OPERATIONobjects such as pipes, 2x4s, 2x6s, or metal grates.n Attach the strap to one side of the laser level base by threading it through the

1213OPERATIONADJUSTING THE LASER LINE See Figure 8.The laser level will project a straight line across an obstruction or interference, as well as arou

1415OPERATIONOPERATING THE LASER LEVELSee Figures 9 - 10.n Place the level in the area where you want the laser line projected.n If a true vertica

1415WARNING:To avoid serious personal injury, always remove the batteries from the tool when cleaning or performing any maintenance.GENERAL MAINT

1617TROUBLESHOOTINGPROBLEM CAUSE SOLUTIONLaser line projection is weak.Batteries are low. Replace with fresh batteries.Laser is off, but motor is on a

1617NOTES

18• SERVICEThis product has no serviceable parts. If unit fails due to normal wear and tear within two years of purchase, return with original receip

23n Introduction ... 2�n Safe

23WARNING!READ AND UNDERSTAND ALL IN-STRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire a

45SAFETY RULESn Avoid exposing the laser level to shock, continuous vibration or extreme hot or cold temperatures. Damage to the tool and/or serio

45SERVICEThis laser level has no serviceable parts. If the unit fails due to normal wear and tear within two years of purchase, return with original r

67FEATURESPRODUCT SPECIFICATIONSRecommended Use ...

67KNOW YOUR LASER LEVELSee Figures 1 - 2.Before attempting to use this product, famil-iarize yourself with all operating features and safety rules.AIR

89ASSEMBLYUNPACKINGThis product has been shipped completely assembled.n Carefully remove the tool and any accesso-ries from the box. Make sure

89OPERATIONWARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second issufficie