Ryobi HPL51 Manual del operador descargar pdf (Pagina 13)

OPERATION

Fig. 9

PLANING EDGES AND MAKING RABBET

CUTS

The planer comes with an adjustable edge guide for preci-

sion edge planing and rabbet cutting. Attach the edge guide

to either side of the planer for planing edges and attach the

edge guide to the left side for making rabbet cuts.

ATTACHING THE EDGE GUIDE FOR PLANING

EDGES

See Figures 9 - 10.

 Unplug the planer.

 Attach the bracket to the desired side of the planer using

the knob bolt.

 Attach the edge guide to the bracket using the knob nut

and the carriage head bolt.

 Tighten the knob nut securely.

PLANING EDGES

See Figure 10.

Follow the directions in the Planing section earlier in this

manual. Hold the edge guide firmly against the edge of the

work surface.

ATTACHING THE EDGE GUIDE FOR MAKING

RABBET CUTS

See Figure 11.

 Unplug the planer.

 Attach the bracket to the left side of the planer using the

knob bolt.

 Attach the edge guide loosely to the bracket using the

knob nut and the carriage head bolt.

 Adjust the edge guide to the desired width for the rabbet

cut.

 Tighten the knob nut securely.

TO MAKE RABBET CUTS

See Figure 11.

Follow the directions in the Planing section earlier in this

manual. Hold the edge guide firmly against the edge of the

work surface.

The depth of the rabbet is determined by the depth

of the cut and the number of passes made along the

work surface. The maximum depth of the rabbet cut is

7/16 in. and has to be cut in 3/32 in. passes or less to reach

the desired depth. The width of the rabbet cut is adjustable

by moving the edge guide.

Fig. 10

BRACKET

KNOB BOLT

EDGE

GUIDE

KNOB NUT

CARRIAGE

HEAD BOLT

PLANING

EDGES

MAKING RABBET

CUTS

Fig. 11

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comentarios a estos manuales

Sin comentarios

Ryobi HPL51 Manual del operador Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Eléctricas Ryobi HPL51