Ryobi JS481L Manual del operador Pagina 5
- Pagina / 32
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
5 — English
EXTENSION CORDS
When using a power tool at a considerable distance from
a power source, be sure to use an extension cord that has
the capacity to handle the current the product will draw. An
undersized cord will cause a drop in line voltage, resulting in
overheating and loss of power. Use the chart to determine
the minimum wire size required in an extension cord. Only
round jacketed cords listed by Underwriter’s Laboratories
(UL) should be used.
When working outdoors with a product , use an extension
cord that is designed for outside use. This type of cord is
designated with “W-A” or “W” on the cord’s jacket.
Before using any extension cord, inspect it for loose or ex-
posed wires and cut or worn insulation.
**Ampere rating (on product data plate)
0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
Cord Length Wire Size (A.W.G.)
25' 16 16 16 16 14 14
50' 16 16 16 14 14 12
100' 16 16 14 12 10 —
**Used on 12 gauge - 20 amp circuit.
NOTE: AWG = American Wire Gauge
WARNING:
Keep the extension cord clear of the working area.Posi-
tion the cord so that it will not get caught on lumber, tools,
or other obstructions while you are working with a power
tool. Failure to do so can result in serious personal injury.
WARNING:
Check extension cords before each use. If damaged
replace immediately. Never use the product with a dam-
aged cord since touching the damaged area could cause
electrical shock resulting in serious injury.
ELECTRICAL
DOUBLE INSULATION
Double insulation is a concept in safety in electric power
tools, which eliminates the need for the usual three-
wire grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need
to be grounded.
WARNING:
The double insulated system is intended to protect
the user from shock resulting from a break in the tool’s
internal insulation. Observe all normal safety precautions
to avoid electrical shock.
NOTE: Servicing of a product with double insulation requires
extreme care and knowledge of the system and should
be performed only by a qualified service technician. For
service, we suggest you return the product to your near-
est authorized service center for repair. Always use original
factory replacement parts when servicing.
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should
be connected to a power supply that is 120 V, AC only
(normal household current), 60 Hz. Do not operate this
product on direct current (DC). A substantial voltage drop
will cause a loss of power and the motor will overheat. If
the product does not operate when plugged into an outlet,
double-check the power supply.
- OPERATOR’S MANUAL 1
- WARNING 2
- WORK AREA SAFETY 2
- ELECTRICAL SAFETY 2
- PERSONAL SAFETY 2
- POWER TOOL USE AND CARE 2
- JIG SAW SAFETY WARNINGS 3
- WARNING: 4
- CAUTION: 4
- ELECTRICAL 5
- FEATURES 6
- ASSEMBLY 6
- OPERATION 7
- ADJUSTMENTS 9
- MAINTENANCE 10
- ACCESSORIES 10
- 2 — Français 11
- AVERTISSEMENTS DE SÉCURITÉ 12
- RELATIFS AU SCIE SAUTEUSE 12
- SYMBOLES 13
- CARACTÉRISTIQUES ÉLECTRIQUES 14
- ASSEMBLAGE 15
- CARACTÉRISTIQUES 15
- UTILISATION 16
- RÉGLAGES 18
- ACCESSOIRES 19
- ENTRETIEN 19
- ADVERTENCIAS DE SEGURIDAD 20
- PARA HERRAMIENTAS ELÉCTRICAS 20
- SÍMBOLOS 22
- ASPECTOS ELÉCTRICOS 23
- CARACTERÍSTICAS 24
- FUNCIONAMIENTO 25
- ACCESORIOS 28
- MANTENIMIENTO 28
- JS481L / JS481LG 32
Relacionado con productos y manuales para Herramientas Eléctricas Ryobi JS481L
(51 paginas)
(26 paginas)
Herramientas Eléctricas Ryobi DBJ50 Especificaciones
(22 paginas)
(22 paginas)
Herramientas Eléctricas Ryobi R160 Especificaciones
(17 paginas)
(17 paginas)
Vivitar DVR 830XHD manuals
Owner’s manuals and user’s guides for Camcorders Vivitar DVR 830XHD.
We providing 1 pdf manuals Vivitar DVR 830XHD for download free by document types: Owner's Manual
Comentarios a estos manuales